Load data for .30 PICRA + .308 | 165gr | H&N TC H

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 165gr \| H&N TC H
Bullet Weight:	165gr \| 10.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.970" \| 24.6mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.119" \| 53.8mm
Seated Depth:	0.142" \| 3.6mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B7410_C311
Last updated:	2025-01-01

Load data for 44 loads in caliber .30 PICRA with .308 | 165gr | H&N TC H bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	70%	34418	85%	**04	100%
ADI APS 450	<<locked>>	64%	36535	90%	**14	100%
Accurate 4100	<<locked>>	72%	34911	86%	**96	92%
[Accurate No. 11 FS]*	<<locked>>	81%	35592	88%	**19	86%
Alliant 2400	<<locked>>	69%	35520	87%	**02	95%
Alliant BLUE DOT	<<locked>>	72%	35969	89%	**80	99%
Hodgdon H110	<<locked>>	77%	35447	87%	**35	90%
Hodgdon LilGun	<<locked>>	77%	35172	87%	**45	95%
Hodgdon TrailBoss	<<locked>>	94%	23815	59%	**9	100%
Maxam CSB 1	<<locked>>	64%	35578	88%	**86	100%
Ramshot Enforcer	<<locked>>	69%	34795	86%	**96	96%
ReloadSwiss RS 14	<<locked>>	96%	23873	59%	**9	100%
ReloadSwiss RS 30	<<locked>>	93%	35752	88%	**65	93%
SNPE Vectan A0	<<locked>>	64%	36318	89%	**25	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	36332	89%	**19	98%
SNPE Vectan BA7 1/2	<<locked>>	65%	34708	85%	**68	100%
[Somchem S265]*	<<locked>>	85%	35491	87%	**86	88%
Vihtavuori 3N38	<<locked>>	67%	34635	85%	**37	100%
Vihtavuori N105	<<locked>>	71%	35360	87%	**66	100%
Vihtavuori N110	<<locked>>	86%	36143	89%	**29	96%
Vihtavuori N32C Tin Star	<<locked>>	79%	35534	88%	**01	100%
[Winchester 296]*	<<locked>>	77%	36260	89%	**55	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26556	65%	**93	100%
ADI APS 450	<<locked>>	61%	34113	84%	**1	100%
[Accurate 4100]*	<<locked>>	61%	23699	58%	**15	85%
[Accurate No. 11 FS]*	<<locked>>	73%	27311	67%	**81	80%
Alliant 2400	<<locked>>	61%	26760	66%	**65	90%
Alliant BLUE DOT	<<locked>>	61%	25309	62%	**15	96%
[Hodgdon H110]*	<<locked>>	65%	23293	57%	**22	81%
[Hodgdon LilGun]*	<<locked>>	61%	18405	45%	**43	82%
Hodgdon TrailBoss	<<locked>>	62%	12705	31%	**6	100%
Maxam CSB 1	<<locked>>	61%	33257	82%	**63	100%
Ramshot Enforcer	<<locked>>	61%	26266	65%	**58	91%
ReloadSwiss RS 14	<<locked>>	61%	11821	29%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	75%	20914	51%	**89	81%
SNPE Vectan A0	<<locked>>	61%	33997	84%	**06	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	14591	36%	**6	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	30676	76%	**12	100%
[Somchem S265]*	<<locked>>	71%	23554	58%	**93	80%
Vihtavuori 3N38	<<locked>>	61%	28776	71%	**58	100%
Vihtavuori N105	<<locked>>	61%	25193	62%	**19	100%
[Vihtavuori N110]*	<<locked>>	63%	16331	40%	**8	80%
Vihtavuori N32C Tin Star	<<locked>>	60%	23496	58%	**0	100%
[Winchester 296]*	<<locked>>	70%	27630	68%	**11	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.